Pressure KRYOCLIM®
A complete solution for chilled fluids, secondary refrigeration and comfort cooling
Presentation
KRYOCLIM® Main advantages
- No corrosion
- Limited condensation
- Reduced pressure losses and frictional losses
- Energy savings
- High impact resistance
- Installation time under control
Applications
Centralised comfort cooling in residential and commercial buildings
- comfort cooling alone
- comfort cooling combined with electrical heating (2 pipes, 2 electrical wires)
Industrial applications
- machine cooling (for process units and production line)
- air conditioning in production workshops, storage warehouses
Food Industry
- refrigeration in storage warehouses, centralised kitchens, supermarkets…
- food processing industry
News
Elbows 90° with threaded brass insert
A new product to connect all the fittings for control and regulation
Building site pictures
Our products
-
PIPES
chamferred at both ends, in 4 meter lengths,
PN10 from Ø20 to 160,
PN6 Ø200 -
ELBOWS 45°
Soc. x Soc.
Ø20 to 200 -
REDUCING BUSHES SHORT PATTERN
Spig. (Ø) - Soc. (ØR)
Ø 25 to 200
ØR 20 to 160 -
MANCHONS INSTRUMENTATION TARAUDAGE 3/4"
Femelle - Femelle
Ø 110 et 160
Documentations
Installation rules
A professional solution, easy installation even on occupied sites, lightweight pipes, easy to handle, simple set tools, no fire permit required, no noisy operations
-
Cutting
Make a clean, square cut using an adapted pipe cutter.
-
Chamfering
Chamfer using an dapted chamfering tool.
-
Checking
the pipes and fittings must be clean and dry, with no scratches or impact marks.
-
Measure and mark
The socket depth of the fitting using the gauge.
-
Cleaning
Clean the parts to be welded, first female then male, using CLEANER+. Use a clean, lint-free piece of cloth. Leave to dry or qipe dry using a soft, lint-free piece of cloth.
-
Shake the pot for 5 seconds
to mix the polymer when doing the firts welds of the day. The more the polymer is shaken, the more fluid it will be. If you find that it is too fluid, leave it to settle for a few minutes.
-
Apply the welding polymer
in a thin, uniform coat. To obtain better adherence, carry out 4 to 8 rotations (depending on the diameter) on the Female parts first, and then the Male parts.
-
Immediately push together
The Male and Female parts up to the mark, push straight without twisting, and hold for 5 seconds.
Certifications
-
REACTION TO FIRE CLASSIFICATION
Download
